About » Company ProfileNews & EventsJob Openings

Uniform Case Sealer with Lid Lifter

Specially designed for produce packers, MARQ’s Case Sealer w/ Lid Lifter (HPA-LL) is a concept unto itself. Its main function is to seal 2- piece HSC cases, but the traditional sealing methods could potentially damage or ruin the delicate product.

 We put a lot of time and thought into how to better achieve a way of sealing these cases while leaving the product unharmed. We came up with a simple machine, usually used in conjunction with a small product settler, which allows the lower half of the case to be lowered down several inches to allow room for sealing. Just inside the gate we placed two mechanical clamps that grasp the outer case allowing for the inner to be lowered, along with the product, onto the split belts below. Side belts then gently guide the case under the tape head to seal the outer case keeping the produce safely below. The case then exits the machine onto a small settler equipped with a sloped ramp, which gently seats the outer case while the product is settled.

Talk to a MARQ sales rep to see what we can build for you.

Posted January 16, 2014

Back

Share this article



RSS Feed [?]

Other stories in:

We were in need of a case erector that could run three shifts per day consistently. After inquiring to our distributor about finding such a machine, they suggested we view the MARQ machine they recently put into implementation at another facility. We were impressed with the appearance of the MARQ machine, and knew it was our ultimate automation solution after watching it in operation.

-Mark V., Country Oven Bakery

©2009-2016 Marq Packaging Systems. All rights reserved.