Quote Request Form
Quote Request Form

RANDOM CASE SEALERS - Request for Quote

This form must be filled out completely in order to give you a complete and accurate quote. Failure to do so will result in untimely delays.


To be used for: Type of quote requested:

Customer Distributor
Name: Name:
Address: Address:
City: City:
State: State:
Zip: Zip:
Phone: Phone:
Fax: Fax:
Email: Email:
Contact: Contact:

Case Sizes Do you have a MARQ-authorized service technician for this machine?

Formed Outside Dimensions (Inches):
(Please verify that dimensions are Outside Dimensions.)

  Length: Width: Height: Weight (lbs): Est. usage if known:
A.
B.
C.
D.

Use additional boxes at end of form if needed.

 Please Select:
What is the technician's name?
Hand of Machine
Right Hand Left Hand
Drive System:

Case Style (Check Appropriate Box):
RSC case
RSC (Regular Slotted Case)		 POL case
POL (Partial Overlap)		 HSC case
HSC (2-piece Half Slotted Case)		 FOL case
FOL (Full Overlap)
All Flaps Meet case
AFM (All Flaps Meet)		 Bliss case
Bliss		 Other
Single/Double Wall: If double wall, is case double scored?
Recycled Corrugated? Bursting Test/Edge Crush Test:

Type of Closure
Top/Bottom Closing: Type of closure:
Brand: Tape # Preference:

Plant Operation
Number of shifts per day: Changeovers per shift:
Actual case speed: Future case speed:
Type of Product: How is this product packed?
How much overpack/underpack? (Inches)  

Position of Top Flaps:

Broken back for packing? Degree:
Parallel to sides of case?

Conveyor deck height:

Infeed: Powered?
Discharge: Powered?

Note: For case sealing applications, cases must be centered on the infeed conveyor. Powered infeed conveyors are recommended for optimum performance for uniform sealing applications.

Other:

Voltage required: Phase required:
Plant Environment

Do you have:
Specification package?
Mechanical package?
Electrical package?
Specific PLC requirements?
If yes, please list.
What are you currently using for random sealing?
Replace existing equipment?
If yes, what manufacturer are you replacing?
Why?

Special Options
Special paint required? If yes, what type?
PLC machine control requested? Brand of PLC?
Pass-through required on random application?

Purchase Information
Anticipated purchase date:
Anticipated installation date:
*Please note that an air line providing 80 PSI of compression will be required. (1/2" or greater on connection.)

Additional Formed Outside Dimensions (Inches):
  Length: Width: Height: Weight: Est. usage if known:
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
U.
V.
W.
X.
Y.
Z.